أقوي برنامج لسوفت وير bfx
برنامج wray ver5.5
أقوي برنامج لعمل فلاش للألكاتل 311 و511
أضغط هنا للتحميل
First Step After Clicking Connect Is Backups Press It 3-5 Times To
Backup The Teh Zone (Technical Zone Area) , The Technical Zone Is The
Most Important Thing In The Alcatel Mobile Phones .
Seconed Step Is Make Sure That The IMEI Wich Is Displayed In The
Software Is The Same As The One On The Back Of The Phone (Just Incase)
Now We Have To DIcide If We Are Going To Write Language Or Change The Firmwere For The Phone Or Any Thing Ells.
For Changing The Phones Firmwere Do The Following Steps :
Write A Good Flash File To The Phone By Clicking Write Flash Function
(To Make Sure That The Flash File Is Good Use Correct Checksums Button )
After Writing The Flash To The Phone Dont Power It Press Change IMEI
And Change Atleast One Digit Of The IMEI After That Dont Power On The
Phone!!! Just Insert Sim Card In The Phone And Then Power It On (To
Update The EEprom) For 5-8 Secondes And Then Turn It Off And Reconnect
The Phone To The Programe And Click On Patch Firmwere And Choose The
Phones Teh Zone File (The File Must Have The Same IMEI That Was On The
Back Of The Phone ) After Patching If You Need To Change The Language
Use The Write Language Button And Write The Language File (Make Sure
That The Language File Is The Same Version Of The Flash On The Phone
That You Have Just Wrote It ) And Finaly Click On Fast Unlock Or Unlock
And Disconnect The Phone Power It ON (With A SIM Inside) Press ****#847#
To Restore To Full Factory Settings (Use This Function If You Had A Bad
Contrast Or Something Ells.
If You Want To Change The Language Only Just Click On Write Language And
Write The Language File Of The Same Version On The Phone And You'll Be
Done.
For Version 253 After Unlock Do Not Disconnect The Phone Just Click On
Change IMEI And Change At Least One Digit Of The IMEI And Then
Disconnect The Phone , If You Didnot Change The IMEI You'll Get A Dead
Phone Becaouse You'll Lose The Teh Zone Just Do As I Say
If You Have A Dead Phone Allready And You Want To Revive It Follow These Steps :
Connect The Phone And See Under The Phone ID Filed If The Phone ID Is
Shown Or Not !!!!! If Its Shown Then It Can Be Revived By Following The
Steps As In Changing The Firmwere ,
If You See In Phone ID (UNKOWN) Then Your Phone Wont Be Rivived But If
You Followed The Changing Firmwere Steps You Will Get Insert Sim Card
Even If There Is A SIM Inside The Phone .
Finally Some FAQ And There Answers :
Q : I Have A Massege Like This (Warning Driver Not Found) When I Run The Software Why!!!!
A : Becaouse You Are Using Win2k Ex (XP,Win2000,NT) So Please Use WIN98SE To Avoide This Massege.
Q : I Have Allways (Commenication Error ) Massege Why!!!!
A : Make Sure That You Are Yousing The Correct Cable And Your PC's Speed
Is More Than 600 MHz And And Your Phones Battery Is Full And Check If
The Cable Is Conected To The PC.
Q : Does This Software Unlockls 15A !!!!
A : No This Software Dosent Unlock 15A Version Unless You Downgrade It And Then Unlock It.
Thats All Now If You Need More Help Just Post Here And Please Dont Send Me More E-mails Asking About Help.
Thank You Members And Take Care Using This Software Becaouse Its Not A Game As Some Members Think
Best Regards -=amir-cairo
هذه ليست طريقتي في الشرح لكني سوف أقوم بشرحه بالعربيه قريبا
برنامج wray ver5.5
أقوي برنامج لعمل فلاش للألكاتل 311 و511
أضغط هنا للتحميل
First Step After Clicking Connect Is Backups Press It 3-5 Times To
Backup The Teh Zone (Technical Zone Area) , The Technical Zone Is The
Most Important Thing In The Alcatel Mobile Phones .
Seconed Step Is Make Sure That The IMEI Wich Is Displayed In The
Software Is The Same As The One On The Back Of The Phone (Just Incase)
Now We Have To DIcide If We Are Going To Write Language Or Change The Firmwere For The Phone Or Any Thing Ells.
For Changing The Phones Firmwere Do The Following Steps :
Write A Good Flash File To The Phone By Clicking Write Flash Function
(To Make Sure That The Flash File Is Good Use Correct Checksums Button )
After Writing The Flash To The Phone Dont Power It Press Change IMEI
And Change Atleast One Digit Of The IMEI After That Dont Power On The
Phone!!! Just Insert Sim Card In The Phone And Then Power It On (To
Update The EEprom) For 5-8 Secondes And Then Turn It Off And Reconnect
The Phone To The Programe And Click On Patch Firmwere And Choose The
Phones Teh Zone File (The File Must Have The Same IMEI That Was On The
Back Of The Phone ) After Patching If You Need To Change The Language
Use The Write Language Button And Write The Language File (Make Sure
That The Language File Is The Same Version Of The Flash On The Phone
That You Have Just Wrote It ) And Finaly Click On Fast Unlock Or Unlock
And Disconnect The Phone Power It ON (With A SIM Inside) Press ****#847#
To Restore To Full Factory Settings (Use This Function If You Had A Bad
Contrast Or Something Ells.
If You Want To Change The Language Only Just Click On Write Language And
Write The Language File Of The Same Version On The Phone And You'll Be
Done.
For Version 253 After Unlock Do Not Disconnect The Phone Just Click On
Change IMEI And Change At Least One Digit Of The IMEI And Then
Disconnect The Phone , If You Didnot Change The IMEI You'll Get A Dead
Phone Becaouse You'll Lose The Teh Zone Just Do As I Say
If You Have A Dead Phone Allready And You Want To Revive It Follow These Steps :
Connect The Phone And See Under The Phone ID Filed If The Phone ID Is
Shown Or Not !!!!! If Its Shown Then It Can Be Revived By Following The
Steps As In Changing The Firmwere ,
If You See In Phone ID (UNKOWN) Then Your Phone Wont Be Rivived But If
You Followed The Changing Firmwere Steps You Will Get Insert Sim Card
Even If There Is A SIM Inside The Phone .
Finally Some FAQ And There Answers :
Q : I Have A Massege Like This (Warning Driver Not Found) When I Run The Software Why!!!!
A : Becaouse You Are Using Win2k Ex (XP,Win2000,NT) So Please Use WIN98SE To Avoide This Massege.
Q : I Have Allways (Commenication Error ) Massege Why!!!!
A : Make Sure That You Are Yousing The Correct Cable And Your PC's Speed
Is More Than 600 MHz And And Your Phones Battery Is Full And Check If
The Cable Is Conected To The PC.
Q : Does This Software Unlockls 15A !!!!
A : No This Software Dosent Unlock 15A Version Unless You Downgrade It And Then Unlock It.
Thats All Now If You Need More Help Just Post Here And Please Dont Send Me More E-mails Asking About Help.
Thank You Members And Take Care Using This Software Becaouse Its Not A Game As Some Members Think
Best Regards -=amir-cairo
هذه ليست طريقتي في الشرح لكني سوف أقوم بشرحه بالعربيه قريبا
